12 13
4. Allow your pet to wear the collar for several minutes then recheck
fit. Check the fit again as your pet becomes more comfortable with the
Collar.
the
CAUTION: Risk of skin damage.
The Re c e i ver Col l a r is not designed to be worn constantly. We
recommend th e Collar not be worn for m ore t han 1 2 h o u rs o u t o f
every 24-h o u r period.
Most pets feel uncomfortable at first wearing the collar. Don’t use
any functions until the pet has gotten used to the collar.
We suggest you give the dog Vibration be fore starting the Static
Shock. After a time of training, the dog will learn that Static Shock
St i mu la ti on w i ll c om e aft er Vi br a ti on . In t h is w ay, the v ib ra ti o n
al o n e c a n e ff e c ti v e l y c u r b t h e i m p r o pe r d e e d s o f t h e p e t. T h e
St i mu l at i on o n ly a c t s as a me n ac e t h a t m i gh t b e u nn e ce s sa r y
most of the time.
WARNING
Fit The Receiver Collar with your dogs:
3A
3B
Important: The proper fit and placement of your collar is important for
effective tr a i n i n g . Th e Contact Points must have direct c o n t a c t with
your pet’s skin on the underside of the dog’s neck.
To assure a proper fit, please follow these steps:
1. Have your pet standing comfortably (3A).
2. Centre the Contact Points underneath your
pet’s neck, touching the skin (3B). If your pet
has a long or thick coat, please use longer
Contact Points, we enclosed 2 sets Contact
Points, short ones and longer ones.
CAUTION: here are 100 levels for
Vibration and Stimulation. The strong
Stimulation can penetrate the hair of
the pet and fabric within 6mm thick. Do
not shave the pet’s neck as this may
increase the risk of skin irritation.
3. The Collar should fit snugly, yet loose
enough to allow one finger to fit between
the strap and your pet’s neck.(3C)
Step
3C
1. Light Standby : In order to save power, the Remote Transmitter
will go into Standby Mode if there is no operation after 20 seconds,
press any button except LED Light Button to activate Remoter
Transmitter, LCD will display.
2. Deep Sleep: In order to save power, the Remote Transmitter will
go into Deep Sleep Mode if there is no operation after 2 minutes,
h ol d t h e M od e b u t t o n f o r 5 s e c o n d s t o a c t i v a t e t h e R e m ot e
Transmitter, LCD will display.
II : Th e r e ce i v e r c o l la r w i ll g o i n t o de e p s l e e p i f n o o p e r at i o n fo r 4
minutes. And any movement by the dog will activate the receiver.
If the Receiver Collar has no response when you press the Y button, and
the Indication light of the Receiver Collar is not on either, you can shake
Receiver Collar or force the dog to move, and the indication light of the
Receiver Collar will show green, which means the Receiver Collar is
activate and will work.
III: When te sting, choose any mode except LED light. When you
under Vibration or Stati c Shock mode, Intensity Le vel cannot be
at a stimulation level of 0, p ress UP/DOWN to adjust.
are
5
To Next Page
Loading...
