To disable sharing, go to the ‘Home’ tab, then tap the ‘Settings’ icon in the upper
right corner, and select ‘Sharing’. To disable sharing for friends, simply switch it
off. To stop public sharing, just tap ‘Stop sharing’. To disable family sharing, just
remove users from your family list by swiping their usernames to the left.
19. Moving your Petcube Bites to a different location
As long as the Petcube Bites is within range of your wireless network, you can
reposition it according to your needs.
However, if you’re trying to use it in a different Wi-Fi environment or want to
connect the camera to a different wireless network, you need to change the Wi-Fi
settings in the Petcube App.
To do that, open the Petcube App, go to the ‘Home’ tab, select ‘Settings’, then
‘Wi-Fi’. Power up your Petcube Bites, wait until it starts up, take a pin and push
the start button on the bottom for 3 seconds until the light changes to pulsing
green. Follow the steps on your screen.
20. Connecting Petcube without using Wi-Fi
The Petcube Bites has no Internet access and can be connected to the Internet
only through a Wi-Fi network.
21. Changing Wi-Fi settings or connecting the Petcube
to a different network
If you need to either change the Wi-Fi settings on your Petcube Bites or connect
it to a different network, open the Petcube App, go to the ‘Home’ tab, select
‘Settings’, then ‘Wi-Fi’. Power up your Petcube Bites, wait until it starts up, take
To Next Page
Loading...
