a pin and push the start button on the bottom for 3 seconds until the light
changes to pulsing green. Follow the steps on your screen.
Android Setup
1. Setting up Petcube Bites camera
To set up your Petcube Bites, please download the Petcube App to your Android
device. The Petcube App requires Android 4.3 or greater and can be downloaded
in the Google Play Store or at the link below.
Connect your Petcube Bites to a power source and wait up to 30 seconds until
the LED light starts pulsing green. Open Petcube App on your Android device,
log in or sign up for a Petcube account using your email or Facebook account.
Go to the ‘Home’ menu on the left side of the app, select ‘Connect Camera’, then
‘Connect Petcube’ and pick Petcube Bites from the list of options. Keep in mind
that you may be asked to turn on Bluetooth.
When the LED light on the camera is pulsing green, hit Next. To identify the
device, press ‘Select’ below the image of Petcube and hit ‘Next’ again when
the LED starts pulsing green rapidly. Wait for the app to exchange data with
the Petcube Bites and scan for available Wi-Fi networks, then select your home
Wi-Fi network from the list, put in your network password and hit ‘Join’. If you
don’t see your home network on the list or if you’re using a hidden network,
connect to your home Wi-Fi by entering the name of your network and password
manually and then hit ‘Join’ (keep in mind that it is case sensitive).
Once the LED light on your Petcube Bites changes to solid white, you are ready
to play with your Petcube Bites.
To Next Page
Loading...
