Important note: The correct wearing and positioning of the bark
control collar is important for effective operation.
To ensure proper wearing, please follow the steps below:
5.Wearing Method:
❶Make sure the bark control collar is closed
❷Keep your dog in a comfortable standing position.
(As shown below A)
❸Place the bark control collar on the dog's neck, place the bark
control collar control ring in the center, and the “on/off” switch on
the operating surface of the collar faces upward.
(As shown below B)
❹Check the tightness of the bark control collar by inserting a nger
between the dog's collar and the back neck. The proper position
should be comfortable rather than tightened.(As shown below C)
❺Let your dog wear a collar for a few minutes, then recheck the t
of a box. Properly adjust the collar to make the dog more
comfortable using the "bark control collar".(As shown below D)
❻Trim the collar as follows
A. Mark the required collar length with a pen.
11
To Next Page
Loading...
