• Overhaul. 360,000 miles/576,000 km (Refer to Air Dryer Maintenance on page
206 for maintenance instructions.)
Safety - Three-point Safety Belt System
• Inspect. 20,000 miles/32,000km If the vehicle is exposed to severe environmental or working conditions, more frequent
inspections may be necessary. (Refer to Safety Restraint System - Inspection on page 223 for maintenance instructions.)
Every 50 Hours
Every 50 Hours
17
Steer Axles - Kingpin Joint Grease / Tie
Rod Ends with Heavy-Duty Multipurpose
Lithium Based Lubricant
•
Use #1 Grade or #2 Grade: See
Kingpins, Thrust Bearings, and
Tie Rod Ends.
Every 750 mi / 1,207 km / 1 mo
*
Use only Spicer Driveshaft approved lubricants when greasing Spicer U-joints.
**
Refer to Spicer Driveshaft service manual DSSM-0100 (3264-SPL) for detailed instructions.
17
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
MAINTENANCE - Preventive Maintenance Intervals
those listed here.
Y53-6113-1A1 (11/20) 177
5
To Next Page
Loading...
