EasyManua.ls Logo

Peterbilt 535 - Page 196

Peterbilt 535
312 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Every 15,000 mi / 24,000 km / 12 mo
20
Cab structure, doors and hoods - Hinges and latch
Lubricate with silicone spray.
Cab structure, doors and hoods - Body and cab holddown bolts
Check the condition and tightness.
Heating and Air Conditioning - Heater and air conditioner
Full operational and diagnostic check. (Refer to Heater and Air Conditioner Maintenance on page 255 for maintenance
instructions.)
Heating and Air Conditioning - Condenser
Clear any debris from the front of the condenser. (Refer to Heater and Air Conditioner Maintenance on page 255 for
maintenance instructions.)
Every 60,000 mi / 96,000 km / 6 mo
Every 60,000 mi / 96,000 km / 6 mo
21
Steer Axle Wheel Ends - Steer Axle Oil
Bath (Adjusted) with Synthetic Lubricant
Every 60,000 mi / 96,000 km / 6 mo
Use SAE 75W-140, SAE 50L: See
Oil Bath for maintenance
instructions.
20
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
*
Use only Spicer Driveshaft approved lubricants when greasing Spicer U-joints.
21
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - Preventive Maintenance Intervals
194 Y53-6113-1A1 (11/20)
5

Table of Contents

Related product manuals