9
Installation of the Complete Device
Install the outlet pipe and the filter tray
1. Please make sure that the pump is placed in the bottom groove correctly. Take out
the outlet pipe (point a) and align it with the water pump outlet (point b), press it
tightly.
2. Align the outlet pipe with the center hole of the filter tray and cover the tray until it is
pressed tightly.
3. Hold the handle above the center hole of the soaked filter. Align it with the center
hole of the filter tray and press down until the outlet pipe is exposed.
4. Please align it with the water outlet and install and press down the drinking tray.
To Next Page
Loading...
