Need help?Do you have a question about the PETKIT Eversweet Solo and is the answer not in the manual?
General| Indication | LED indicator for water level and filter replacement |
|---|---|
| Filtration System | activated carbon, ion exchange resin |
| Power Supply | 5V/1A |
| Modes | Normal Mode |
| Weight | 0.8 kg |
| Water Flow | Adjustable |
| Material | ABS (Acrylonitrile Butadiene Styrene) |
| Noise Level | Below 30 dB |
Unpack and take out the main machine and all parts in sequence.
Place the filter unit into water, soak and clean it thoroughly before installing. Recommended to soak twice, 5 minutes each time and rinse slightly.
Clean the tray set, water storage barrel and internal accessories with clean water before use. Recommended to clean twice.
Steps for correctly assembling the outlet pipe, filter tray, filter, and drinking tray.
Instructions for removing the tray and adding clean water to the correct level.
Connect the USB power port to the power plug and then plug it into a power socket to start.
Green light indicates the device is working in 3-minute cycles.
Blue light indicates uninterrupted water welling.
Flashing green light signals the need to replace the filter.
Flashing blue light indicates low water level; device is in standby.
Alternating green and blue lights indicate a power failure issue.
Grass-green light indicates the device is working in 3-minute cycles.
Orange light indicates uninterrupted water welling.
Flashing grass-green light signals the need to replace the filter.
Flashing orange light indicates low water level; device is in standby.
Alternating grass-green and orange lights indicate a power failure issue.
Guidelines for cleaning the water storage barrel, including temperature limits and prohibited cleaning agents.
Instructions on how frequently to replace the filter and how to prepare the new filter.
Weekly cleaning procedure for the CNC silent pump to prevent clogging and ensure water quality.
Troubleshooting common issues related to indicator lights not turning on or failing to reset.
Information on normal phenomena like black powder from the filter and its purpose.
Diagnosing and resolving problems with water outflow and mode switching.
Identifying causes and solutions for decreased water flow from the fountain.
To Next Page
