Need help?Do you have a question about the Petporte Smart flap and is the answer not in the manual?
General| Installation | Door or Wall |
|---|---|
| Selective Entry | Yes |
| Curfew Mode | Yes |
| Selective Exit | Yes |
| Low Battery Indicator | Yes |
| Weather Resistance | Yes |
| Suitable For | Cats |
| Self Lining | Yes |
| Compatibility | Most common microchips |
| App Compatibility | No |
| Material | Plastic |
| Power Source | Battery-powered |
Default mode allowing programmed cats entry and exit.
Prevents pets going out during darkness, allows entry.
Allows pets to enter but prevents exit, useful for vet visits.
Process for programming cat microchip IDs into the system.
Access to advanced customization options for the flap.
Locks the unit's buttons to prevent unauthorized changes.
Resets programmed microchip data.
Resets the unit to factory settings.
Cancels extended mode and returns to normal operation.
Allows any animal to enter, regardless of microchip.
Disables audible beeps for pet recognition.
Adjusts light sensor sensitivity for Night Mode.
Sets the duration before locks re-engage after recognition.
Configures lock state during battery power loss.
Unused or future modes.
Introduces the Pet Porte Smart Flap, its purpose, and core function.
Discusses microchip types and compatibility with the flap.
Step-by-step guide to program pet microchips.
Default mode, allows programmed cats entry.
Prevents pets going out during darkness, allows entry.
Allows pets to enter but not exit.
Introduction to advanced customization options.
Locks the unit's buttons to prevent unauthorized changes.
Resets programmed microchip data.
Resets the unit to factory settings.
Cancels extended mode and returns to normal operation.
Allows any animal to enter, regardless of microchip.
Disables audible beeps for pet recognition.
Adjusts light sensor sensitivity for Night Mode.
Sets the duration before locks re-engage after recognition.
Configures lock state during battery power loss.
To Next Page
