quick guide 3
FUNCTION BUTTON ACTIVATION
Normal Mode
Night Mode
(not available
in battery
mode)
Vet Mode
Program Entry
Extended Modes
Child Lock
Erase Mode
Default Mode
This is the default mode on powering up and requires no
button activation.
Press the Red Button for < 2 seconds:
The red light should then illuminate. During the hours of
darkness the green light will illuminate and, automatically,
the system will not allow any cats to go out.
Press the Red Button for > 2 seconds:
The red light will then flash and the unit will not allow any
cats to go out.
Press and hold the Green Button for > 10 seconds:
The green light will flash and you then have 30 seconds in
which to program your cat by passing the porch over the
animal.
Press and hold both the Red and Green Buttons for
> 2 seconds
The unit will emit a long beep indicating that the extended
modes are now available and the green light will be lit.
(See the Extended Modes - Quick Guide on page 4)
Press and hold the Red Button for > 30 seconds
The unit will emit a series of beeps indicating the unit is
now locked.
Press and hold both the Red and Green Buttons for
> 30 seconds
The unit will emit a series of short beeps followed by a long
beep. Both lights should now be flashing.
Press and hold the Green Button for > 30 seconds
The unit will emit a series of short beeps followed by a long
beep. Both lights should extinguish.
Quick Guide
To Next Page
Loading...
