Please read the instructions carefully before using the product, and keep them after reading
Operation guide
Fully automatic
cat litter box
Hangzhou Beiqu Technology Co., Ltd.
1
2
3
4
5
6
7
41
Motor chassis (not washable）
46
Data display screen
4
2 Spherical plastics hood(washable)
4
7 Multifunctional button
7
3
Patent separation structure
4 Sand removal pedal
7
5
Posterior closed deodorization litter can
Product components
SLEEP
STOP
The machine goes into standby state and stops working.
Automatically return back to normal operation mode after
10 hours.You can quit sleep mode manually in instant as well.
WAIT
GO
Functional mode
Sleep mode:
When the machine is running, you can press the
multifunctional button to stop operation immediately.
Emergency braking:
When the machine is activated with the cat in it, it will goes
to wait mode. Machine will go into operation after the cat
leaves. If the cat stays in the box for a very short time, wait
mode won’t be activated, and the machine won’t go into
operation after the cat leaves.
Wait mode:
In this mode, the cat litter box will start rotating to cleaning
procedures. Under this mode, when the cat enters or
touches, the machine will immediately enter emergency
braking mode. After the cat leaves, it will continue to
complete the procedures.
Operation mode:
Important safeguards
Product specifications
5. Do not put the machine in direct or close contact with heat to prevent damage to
machine components.
2. Do not stack items on the machine in order to avoid interfering with data
measurement and prevent damage to machine components.
1. Place the machine on a stable and open ground to avoid vibration or interference
of data measurement.
3.Do not place the machine at a humid environment and avoid placing it directly
under water to prevent damage to electronic components.
4. Do not place the machine on a soft surface (carpet for example) to avoid interfering
with data measurement.
6. Use spherical bentonite cat litter.
8. When wast is dumped from the litter can, please install the litter can in place.
7. Please lift and move the product with both hands. Do not drag it on flat surface.
9. For the safety of the cats, please only use it for cats that are at least three-month
old, and weighs over 1.5 Kg.
Product model
Appearance size
Rated voltage
Product material
Minimum accuracy
Noise
Product weight
Rated power
Maximum range
Maximum cat litter
ACC-18-01
624×587×537mm
100-220V
PP plastic
0.01Kg
≤50dB（A）
7.5Kg
5W
20Kg
4Kg
To Next Page
Need help?
General
