In
standby state, press and hold the record button
for 3 seconds until the feeder makes a “Drip”
sound, and you can start recording at the microphone
position
Note that the recording button should always be
pressed continually 10 seconds during recording.
After the recording is completed. the feeder will make
two “Dripping”sound.
Af
ter recording done, you can preview the recorded
audio by short pressing the record button . If you
need to change the recording, please re-record it. The
closer to the microphone,the louder voice can be
recorded.
Th
e default of voice recording playback is 3times.
To Next Page
Loading...