Petsafe Bark Control Collar - Key Definitions; Contact Points and Sensor Probe; Low Battery Indicator Function; Fit the Bark Control Collar

www.petsafe.net 7
time your dog barks within 30 seconds of the previous bark. If your dog does not bark
again within 30 seconds, the Bark Control Collar will reset itself to the lowest level
of static correction. Along with each static correction, there will be an audible beep.
As an added safety feature, the Bark Control Collar will automatically shut off for 3
minutes if your dog barks 15 times or more within a 50-second period.
Key Definitions
Contact Points: Deliver the safe static correction.
Sensor Probe: Detects the vibrations of your dog’s
barking. Note: The Sensor Probe is not adjustable.
Low Battery Indicator: The Indicator Light will
begin flashing when battery is low.
Fit the Bark Control
Collar
Important: The proper fit and placement of your Bark Control Collar is
important for effective operation.
To assure a proper fit, please follow these steps:
1. Make sure that the battery is not installed in the Bark Control
Collar.
2. Start with your dog standing comfortably (A).
BATTERY 6V
RFA-67
Low Battery
Indicator Light
Battery
Contact Points
Washers
Sensor Probe
A