24
MOUNTING OPTIONS*
Mounting via wall bracket
1. Drill two holes and insert the dowels suitable for your wall
(sold separately).
2. Then screw the bracket to the wall with the screws provided.
Mounting via adhesive surface
1. Note that the surface to be covered on the mount must be free
of dirt.
2. Place the round adhesive pads on the round support surface.
3. Please also pay attention to the mounting surface (wall, cei-
ling etc.). For best results, this surface should be dirt-free and
completely flat.
* Alternatively, you can simply put the camera down somewhere.
To Next Page
Loading...