Petzl Dart - Switching to mono or dual front points; Antibott system; Additional information; A. Lifetime

3/4
PPE INSPECTION - Inspection procedure - Crampons (110416)
7. Checking the binding system
6. Checking the antibott system
• Check the condition of the front binding system (wear, cracks, deformation, corrosion...).
If necessary, replace the front binding system with new spare parts.
• Check the condition of the rear binding system (wear, cracks, deformation, corrosion...).
Check the condition of the strap and of the fastening buckle.
If necessary, replace the rear binding system with new spare parts.
If necessary, replace the straps with new spare parts.
• If applicable, check the condition and
function of the heel lever adjustment system.
• Check the condition of the front and rear ANTISNOW (wear, cracks,
deformation...) and the screws attaching them to the crampon.
If necessary, replace the ANTISNOW with new spare parts.
8. Checking the fit on your boots
• See the fitting instructions in the Instructions for Use for your crampons.