Petzl OSCILLANTE User Manual

1
P02 oscillante P025010a (220609)
WARNING
Activities involving the use of this equipment are inherently dangerous.
You are responsible for your own actions and decisions.
Before using this equipment, you must:
- Read and understand all Instructions for Use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and limitations.
- Understand and accept the risks involved.
FAILURE TO HEED ANY OF THESE
WARNINGS MAY RESULT IN SEVERE
INJURY OR DEATH.
OSCILLANTE
3 year guarantee - Made in France
EN 12278
0197
42 g
individually tested
7
11 mm
(EN) Pulley
(FR) Poulie
(DE) Seilrolle
(IT) Carrucola
(ES) Polea
UIAA
Tracability and Markings
00 000 A 0000
0197
TÜV Rheinland Product
Safety GmbH Am Grauen
Stein
D-51105 KÖLN
N°0197
APAVE SUD Europe BP 193,
13322 Marseille Cedex 16
N°0082
Body controlling the
manufacture of this PPE
Traceability:
datamatrix=
product reference
+ individual
number
Rope
diameter
Year of
manufacture
Day of
manufacture
Control or name
of inspector
Incrementation
Individual number
Notified body that carried
out the CE type inspection
a.
c.
e.
f.
g.
h.
i.
d.
b.
1
2
3
Patented
5B.
Breaking load
Charge de rupture
Bruchlast
Carico di rottura
Carga de rotura
Working load
limit
Valeur d’utilisation
maxi
Maximale
Gebrauchslast
Valore d’utilizzo
massimo
Valor de utilización
máximo
5A.
2 kN 2 kN
4 kN
7,5 kN 7,5 kN
15 kN
Nomenclature of parts
2.
3.
Field of application
1.
Inspection, points to verify
4.
Values
5.
Compatibility

Petzl OSCILLANTE Specifications

General

Brand	Petzl
Model	OSCILLANTE
Category	Safety Equipment
Language	English

Summary

Field of Application

Nomenclature of Parts

Inspection and Verification Points

Compatibility

Product Values and Specifications

Working Load Limit

Maximum load for safe operation of the pulley.

Breaking Load

Load at which the product is expected to fail.

Tracability and Markings

Notified Body for PPE Manufacture

Identifies the body overseeing PPE manufacturing.

Notified Body for CE Type Inspection

Identifies the body for CE type inspection.

Datamatrix Traceability

Product reference and individual number tracking.

Rope Diameter Compatibility

Specifies the range of compatible rope diameters.

Individual Product Number

Unique identifier for each product unit.

Year of Manufacture

Indicates the year the product was manufactured.

Day of Manufacture

Indicates the day the product was manufactured.

Inspector Identification

Marks the control or name of the inspector.

Incrementation Identifier

Sequential number for tracking or identification.

Pulley System Efficiency

Simple Pulley System Efficiency

Efficiency of a basic pulley system setup.

2:1 Hauling System Efficiency

Efficiency of a 2:1 mechanical advantage hauling system.

3:1 Hauling System Efficiency

Efficiency of a 3:1 system with progress capture.

Progress Capture Systems

Positioning and Redirection