PEUGEOT 102 SPB-U2 User Manual

Licensing and registration regulations vary by state, consult local laws.

Guidelines for safe operation, including protective gear, riding practices, and storage.

Details on the moped's frame, fuel tank, tools, engine covers, and other components.

Information on the front fork and rear suspension system.

Description of the front and rear drum brakes.

Specifications of the single-cylinder, air-cooled, two-stroke engine.

Explanation of the starting clutch and secondary transmission.

Details on the electrical system powering lights and horn.

Location of the vehicle's identification plate and security features like anti-theft lock.

Identification and function of various controls like brake levers, decompressor, and fuel valve.

Location and operation of the light switch, horn button, and ignition switch.

Details on throttle control, horn button, cut-off switch, and adjustment bolts.

Identification of engine-related parts like exhaust, magneto, and kickstand.

Correct fuel mixture for the engine and estimated riding range on a full tank.

Operation of the fuel valve with its different positions (OFF, ON, RESERVE).

How to adjust handlebars and the importance of tire pressure.

Pre-ride checks for brakes and setting the drive knob.

Ensuring lights and electric horn operate correctly before riding.

Detailed steps for starting the moped engine using two different methods.

How to safely slow down and stop the moped.

Instructions for parking the moped on its stand and using the anti-theft lock.

Instructions for pedaling the moped with the engine off.

Steps for preparing the moped for long-term storage and after storage.

How to identify and address primary transmission belt slippage issues.

Recommended lubrication intervals and points for various components.

Cleaning and lubricating the secondary transmission drive chain.

Steps to adjust the tension of the drive chain.

Information on spark plug checks, cleaning, replacement, and gap.

Reminder to check tire pressure monthly for performance and safety.

How to adjust brake cable tension and lever play.

General cleaning instructions for the moped's body, chrome, and painted surfaces.

Step-by-step instructions for removing the front and rear wheels.

Instructions for tire and tube repair, including patching and inflation.

Troubleshooting common engine problems related to starting and fuel delivery.

Advice on checking and replacing the spark plug for ignition issues.

Operation of headlight, tail light, speedometer lights, horn, and ignition switch.

Procedure for adjusting the headlight beam angle for safe night riding.

Specifications for headlight, taillight, stoplight, and speedometer bulbs.

Instructions for replacing headlight, taillight, and speedometer bulbs.

Troubleshooting common lighting system failures and bulb replacement order.

Advice on pollution control, noise, and relying on authorized dealer service.

Details of the limited six-month warranty, coverage, and exclusions.