EasyManua.ls Logo

PEUGEOT SpeedFight 3 User Manual

PEUGEOT SpeedFight 3
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Sales division
Technical network leadership
WORKSHOP MANUAL
-

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the PEUGEOT SpeedFight 3 and is the answer not in the manual?

PEUGEOT SpeedFight 3 Specifications

General IconGeneral
Displacement49.9 cc
Cooling SystemAir cooled
Fuel SystemCarburetor
IgnitionCDI
Front SuspensionTelescopic fork
Front BrakeDisc
Rear BrakeDisc
Seat Height800 mm
Dry Weight97 kg
Width700 mm
Top Speed45 km/h
TransmissionAutomatic
Engine TypeSingle-cylinder, 2-stroke
Fuel Capacity8 liters

Summary

Vehicle Characteristics

Engine Specifications

Technical details of the engine, including type, bore, power, and torque.

Service Schedule and Maintenance

Scheduled Service Checks

List of items to be inspected at each service interval.

Key Maintenance Operations

Essential service tasks like spark plug, air filter, and transmission checks.

Important Points and Tightening Torques

Engine Component Tightening Torques

Specified torque values for tightening engine internal and external components.

Cycle Part Fastener Torques

Torque values for chassis, suspension, and brake component fasteners.

Engine and Transmission Servicing

Engine Oil Change Procedure

Detailed steps for draining, refilling engine oil, and filter replacement.

Spark Plug Replacement

Instructions for removing, replacing, and tightening the spark plug.

Air Filter Replacement

Steps to replace the air filter element and clean the housing.

Clutch Lining Inspection and Replacement

Procedures for checking clutch lining thickness and replacing the assembly.

Valve Clearance Measurement and Adjustment

Steps for measuring and adjusting intake and exhaust valve clearances.

Braking System Maintenance

Front Brake Pad Inspection

How to check front brake pad wear against minimum thickness.

Front Brake Pad Replacement

Steps for removing and installing new front brake pads.

Brake Fluid Level Check and Top-up

Procedure for checking and topping up the brake fluid reservoir.

Steering and Fork Assembly Maintenance

Front Fork Seal Replacement

Detailed steps for replacing front fork oil seals.

Front Wheel and Fork Component Removal

Procedures for removing the front wheel, mudguard, and fork components.

Fork and Steering System Installation

Procedures for installing the fork and properly tightening the steering system.

Steering System Final Tightening and Adjustment

Final steps for tightening the steering head locknut and related components.

Electrical System Diagnostics and Checks

Power Unit Removal and Mounting

Engine Unit Disconnection Procedures

Steps for disconnecting electrical, fuel, and vacuum lines from the engine.

Final Power Unit Detachment

Steps to detach and remove the engine from the scooter frame.

Related product manuals