PEUGEOT SpeedFight 3 User Manual

STEERING/FORK
39
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
STEERING/FORK
Changing the front fork seals
- Suspend or immobilize the machine
securely.
- Remove the front brake caliper from the fork
tube (2 screw).
- Loosen the wheel spindle clamping screw (1).
- Remove the wheel spindle (2).
- Remove the front wheel.
- Remove the front mudguard (4 screw).
- Remove the screws fastening the fork
stanchions (3).
- Remove the fork stanchions.
- Carefully remove the lip seals using a
screwdriver (4).
- Install new lightly lubricated lip seals.
- Fit the fork staunchions.
Tightening torque: 25 Nm.
1
2
3
4

PEUGEOT SpeedFight 3 Specifications

General

Displacement	49.9 cc
Cooling System	Air cooled
Fuel System	Carburetor
Ignition	CDI
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Seat Height	800 mm
Dry Weight	97 kg
Width	700 mm
Top Speed	45 km/h
Transmission	Automatic
Engine Type	Single-cylinder, 2-stroke
Fuel Capacity	8 liters