54
INSTRUMENTS and CONTROLS
Coolant temperature indicator
With the hybrid system active, when the
needle is:
- in zone A , the temperature is cor-
rect,
- in zone B , the temperature is too
high; the max temperature warning
lamp 1 and the central STOP warn-
ing lamp come on, accompanied by
an audible signal and a message in
the screen.
After driving for a few minutes, the tem-
perature and pressure in the cooling
system increase.
To top up the level:
) wait for the engine to cool,
) unscrew the cap by two turns to allow
the pressure to drop,
) when the pressure has dropped,
remove the cap,
) top up the level to the "MAX" mark.
You must stop as soon as it is safe
to do so.
Wait a few minutes before switching off
the engine.
Contact a PEUGEOT dealer or a quali-
fi ed workshop.
To Next Page
Loading...
Need help?
General
