256
8
06
7
Enter the same code on the telephone then accept
the connection.
Then accept automatic connection on the telephone to allow the
telephone to reconnect automatically every time the vehicle is
started.
On return to the vehicle,the last telephone connected
automatically reconnects, within around 30 seconds after
switching on the ignition. (Bluetooth activated and visible).
To modify the automatic connection mode, remove the pairing and
pair the telephone again with the desired mode.
USING THE TELEPHONE
The " Hands-free mode " should be used in preference if
"Streaming" is not desired.
The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone
manual and with your network provider for details of the services available to you.
The ability of the system to connect in only one mode depends on
the telephone. The two modes may both connect by default.
Select a code for the connection then
con¿ rm " OK ".
APp-W2_01_2010_anglais_cag_pdf_H256 256
APp-W2_01_2010_anglais_cag_pdf_H256 256
03/11/2010 14:23:31
To Next Page
Loading...