PEUGEOT GPS - Page 283

263
4
3
2
1
6
5
09
CONFIGURATION
SETTING THE DATE AND TIME
The SETUP function gives access to the following options: System language, Date & Time, Display
(Brightness, Colour, Map colour), Vehicle, Units, System.
Set the parameters one by one using
the direction arrows and con¿ rm by
means of the dial.
Select the "Date format" function and
press the dial to con¿ rm.
Select the "Set date & time" function
and press the dial to con¿ rm.
Con¿ rm the format required using the dial.
Pressing the SET UP button for more than 2 seconds gives access to:
These settings must be re-entered if the battery has been
disconnected.
Press the SET UP button.
Con¿ rm the format required using
the dial.
Select the "Time format" function and
press the dial to con¿ rm.
SET DATE & TIME
Select the "Date & Time" function and
press the dial to con¿ rm.
DESCRIPTION OF THE UNIT
GPS COVERAGE
DEMO MODE
DATE & TIME
AP_3008_01_2010_anglais_cag_pdf_263 263
AP_3008_01_2010_anglais_cag_pdf_263 263
04/02/2010 14:32:25
04/02/2010 14:32:25