Need help?Do you have a question about the Pfaff 1525 and is the answer not in the manual?
General| Buttonhole Styles | 4-step |
|---|---|
| Built-in Stitches | 25 |
| Stitch functions | Decorative |
| Presser Feet | Zipper, Buttonhole |
| Max Stitch Length | 4.0 mm |
| Max Stitch Width | 5 mm |
Critical warnings regarding machine operation hazards such as needle injury, moving parts, and crushing.
Guidelines for safe machine operation by trained personnel, observing all safety notices and manufacturer instructions.
Detailed specifications including stitch type, needle sizes, thread sizes, and noise levels for both models.
Instructions on how to turn the machine on and off using the main switch.
Explanation of the pedal's functions: neutral, sewing, presser foot lift, and thread trim.
Description of the functions assigned to each key on the machine head for setting operations.
How to use the knee switch to alternate between two pre-selected feed stroke settings.
Guidance on using thumb wheels to set and pre-select desired stitch lengths.
Instructions for adjusting the top feed stroke using a control knob.
Guidance on selecting a suitable site and ensuring proper installation conditions.
Final checks and procedures before the machine is put into operation.
Step-by-step guide for inserting the needle into the needle bar of the PFAFF 1525.
Step-by-step guide for inserting needles into the needle bar of the PFAFF 1526.
Procedure for winding thread onto the bobbin and adjusting the winder tension.
Instructions for replacing the bobbin, threading it, and regulating bobbin thread tension.
Guide for threading the needle and adjusting its tension on the PFAFF 1525.
Guide for threading needles and adjusting their tensions on the PFAFF 1526.
Detailed steps for cleaning the hook area of the sewing machine.
Instructions for properly oiling the hook mechanism and maintaining the oil level.
General procedures for adjusting the fundamental mechanical settings of the sewing machine.
Ensuring the unison feed mechanism is in its neutral position without movement.
Adjusting the unison feed mechanism's motion for correct operation at longest stitch length.
Procedure for adjusting the lifting motion of the bottom feed dog.
Procedures for adjusting the edge trimmer mechanism.
Procedures for adjusting the thread trimmer unit.
Procedures for adjusting the thread trimmer unit.
To Next Page
