Pfaff 1540 - Inserting the Bobbin; Inserting the Bobbin Case

Operate your
Pfaffsekct
Inserting the
bobbin
Insert the
full
bobbin into
the bobbin case.
\
In
doing so,
pull the
thread
sideways
through
slot A,
then
under the
tension
plate B
until it
rests in
the opening (see
arrow).
A
Check:
When you
lookat
the
bobbin
and
pull
the thread,
the
bobbin must
turn
clockwise.
Inserting the
bobbin case
Lift
lever F
and slide
the
bobbin case
onto
the
hook pin D as
far as
it will go.
Opening
E
of the
bobbin
case
must face
upwards.
Check:
Pull the
bobbin
thread
sharply.
The
bobbin case
must
not fall out
of the
hook.
D
-F