Pfaff 160S User Manual

15
C
D
B
Needle Threader
The integrated needle threader allows you
WRWKUHDGWKHQHHGOHTXLFNDQGHDV\
The needle must be in its highest position
to use the built-in needle threader. Turn the
handwheel until the notch on the wheel is
SRLQWLQJXSZDUGV$:HDOVRUHFRPPHQG
lowering the presser foot.
1. Use the handle (B) to pull the needle
threader all the way down. The metal
ÁDQJHVFRYHUWKHQHHGOH$VPDOOKRRN
ZLOOSDVVWKURXJKWKHQHHGOHH\H.
2. Place the thread from the back over the
WKUHDGJXLGH&DQGXQGHUWKHVPDOO
KRRN'
3. Let the needle threader gently swing
back. The hook pulls the thread through
the needle eye and forms a loop behind
the needle. Pull the thread loop out
behind the needle.
4. Raise the presser foot and place the
thread under it.
Note: The needle threader is designed to be used
for size 70-120 needles. You cannot use the
needle threader for size 60 needles or smaller,
wing needles or twin needles.
There are also some optional accessories that
require manual threading of the needle.
When threading the needle manually, make sure
that the needle is threaded from front to back.
A

Pfaff 160S Specifications

General

Brand	Pfaff
Model	160S
Category	Sewing Machine
Language	English