19. Pfaff 238-115 for
Cording
The Pfaff 238-115 is specially fitted for multi-needle decorative stitching and cording
operations. To suit different requirements, this machine is supplied in a number of
varieties equipped with different needle holders, cording plates and cording feet, as
follows:
238-115/1-6
Two
and three-needle ornamental stitching in straight or narrow zigzag
stitch; needle plate slot 3/16" or 1/4" (4.5 or 6.0 mm) wide; needle hold
er
fitted with
double-threaded
screw;
System
130 B
needles.
238-115/1-45 Two or three-needle air cording; needle holder fitted with double-thread
ed
screw;
System
130
Br
and
130 Bl
needles.
The
needle
gauge
can
be
adjusted
by turning only
one
screw.
Available
for maximum needle gauges of 1/8", 3/16", and 1/4"
(3.0,
4.5 and
6.0 mm).
238-115/1-235
Same as
238-115/1-45,
but
fitted
to make
filled
cording: System 130 Br
and
130
Bl
needles.
238-115/2-45
Two-needle air cording in needle gauges
ranging
from
1/16"
to 1/4"
(1.4 —6.0 mm); needle holder jaws individually adjustable; available for
maximum
needle gauges of 1/8", 3/16", and 1/4"
(3.0,
4.5 and 6.0 mm);
System
134 R
needles.
238-115/2-245
Same as
238-115/2-45,
but fitted to make
filled
cording; System 134 R
needles.
238-115/4-45 Four-needle air cording on gloves, etc.; needle holder fitted with double-
threaded screw; four needles
are
inserted in slot of needle holder jaws
and
are
clamped
in position by tightening
double-threaded
screw;
shanks
of
outer
needles
are
flattened
on
one
side,
while
shanks
of
inner
nee
dles
are
flattened on both sides; over-all width of triple cording 3/16" or
7/32"
(4.7
or 5.4
mm);
System 134 Rfr and 134
RFI
or System 134
Rfmc
and
134
Rfmh
needles.
238-115/5
This
variety
is supplied on special request
only.
Fitted
with
exchange-
abie
needle
holders
for 1, 2
and
3
needles;
can
be
combined
with
sub
class
-6, -45
and
-245
organizations;
System
130 B or 130 Br
and
130 Bl
needles.
26
To Next Page
Loading...
Need help?
General
