Pfaff passport 2.0

Questions and Answers:

T
Taylor FranklinJul 26, 2025
Why does the needle thread break on my Pfaff Sewing Machine?
- A
  Andrew DickersonJul 26, 2025
  Several factors can cause the needle thread to break. Ensure the needle is correctly inserted and is the appropriate type (system 130/705 H). Replace the needle if it's bent or blunt. Verify that the machine is threaded correctly and that the needle size matches the thread. Use high-quality thread from an authorized PFAFF® dealer. Ensure the correct spool cap is used and try different spool pin positions. Replace the stitch plate if it is damaged.
B
Brandon MartinezJul 30, 2025
Why is my Pfaff Sewing Machine skipping stitches?
- W
  William StoneJul 30, 2025
  Several issues can cause skipped stitches. Ensure the needle is correctly inserted. Use needle system 130/705 H. Replace the needle if it is bent or blunt. Check how the machine is threaded. Ensure the correct presser foot is attached. Verify that the needle is the correct size for the thread and fabric being used.
D
Danielle RobertsAug 3, 2025
How to fix uneven stitches on Pfaff Sewing Machine?
- J
  James RhodesAug 3, 2025
  Uneven stitches in a seam can occur if the thread tension isn't correct; check both the needle thread tension and the threading. Using thread that is too thick or slubbed can also cause this issue, so change the thread. Make sure the bobbin thread is evenly wound. Also, ensure that a proper needle is inserted correctly.
R
Richard MendozaAug 7, 2025
What to do if the bobbin thread breaks on my Pfaff passport 2.0?
- K
  Kathleen NolanAug 8, 2025
  Bobbin thread breakage can occur for several reasons. Check that the bobbin is inserted correctly. If the stitch plate hole is damaged, replace it. Clean any lint from the bobbin area. Ensure the bobbin is wound correctly; if not, wind a new one.
A
Abigail DaviesAug 12, 2025
What to do if my Pfaff passport 2.0 Sewing Machine will not sew?
- M
  Marvin GordonAug 12, 2025
  If your Pfaff sewing machine won't sew, begin by checking that all plugs are securely plugged into both the machine and the wall socket. Additionally, make sure the bobbin winder lever is pushed to the sewing position.
H
harrisonlisaAug 16, 2025
What to do if the main motor of my Pfaff Sewing Machine becomes overloaded?
- L
  ltrujilloAug 16, 2025
  If the main motor becomes overloaded, it might be due to thread twisted or jammed in the bobbin case area or the feed dogs. Remove the stitch plate and clean threads and lint from the feed dogs and bobbin case area. Then, re-thread the machine with both top and bobbin threads.
A
adriandavisAug 21, 2025
What to do if the function buttons on my Pfaff passport 2.0 Sewing Machine do not respond to touch?
- S
  Steven WheelerAug 21, 2025
  If the function buttons on your sewing machine aren't responding, it might be due to static electricity. Try turning the machine OFF and then ON again. If the problem continues, you should contact your local authorized PFAFF® dealer.

Pfaff passport 2.0 Specifications

General

Stitch Width	6 mm
Stitch Length	4 mm
Number of Stitches	70
Free Arm	Yes
Built-in Needle Threader	Yes
Voltage	220-240V
Weight	6.3 kg
Bobbin Type	Drop-in bobbin
Dimensions	37 cm x 19 cm x 29 cm

Summary

Important Safety Instructions

Safety Precautions and Warnings

Details critical safety instructions for operating the sewing machine.

Servicing of Double Insulated Products

Servicing Guidelines

Provides guidelines for the safe servicing of double-insulated sewing machines.

Introduction

Machine Overview

Provides a detailed illustration and labeling of the sewing machine components.

Introduction

Accessories

Lists and illustrates the included accessories with their respective numbers.

Presser Feet

Types and Uses of Presser Feet

Describes various presser feet, their functions, and specific uses.

Stitch Overview

Utility Stitches

Details various utility stitches, their numbers, names, and descriptions.

Stitch Overview

Quilt, Needle Art, Satin, and Decorative Stitches

Categorizes and details the various stitches available on the machine.

Preparations

Unpacking and Power Connection

Steps for unpacking the machine and connecting it to the power supply.

Packing Away After Sewing

Instructions for safely turning off and storing the sewing machine and accessories.

Preparations

Free Arm, Leveling, Thread Cutter, and Spool Pins

Details machine features like free arm, leveling, thread cutter, and spool pin usage.

Preparations

Spool Pin Positions and Machine Threading

Explains spool pin positions and provides detailed steps for threading the machine.

Preparations

Needle Threader and Twin Needle Setup

Guides on using the automatic needle threader and threading for twin needle sewing.

Preparations

Bobbin Winding Procedure

Detailed steps for winding a bobbin correctly.

Preparations

Bobbin Insertion and IDT System

Guides on inserting the bobbin and engaging/disengaging the integrated dual feed system.

Presser Foot Pressure

Thread Tension Adjustment

Instructions for adjusting needle and bobbin thread tension for optimal stitches.

Needles

Needle Types and Selection

Describes different needle types (Universal, Stretch, Embroidery, Denim, Wing) and their uses.

Changing Needle and Presser Foot

Needle, Feed Dog, and Presser Foot Operations

Steps for changing needles, lowering feed dogs, and changing presser feet.

Control Panel Buttons

Button Operations for Sewing Control

Explains the function of each button on the control panel for sewing operations.

Warning Messages and Sound

System Alerts and Audio Settings

Covers machine warning messages and how to manage operational sounds.

Sewing Operations

Selecting and Adjusting Stitches

Guides on selecting stitches and adjusting their length and width.

Sewing Techniques

Zigzag Stitch and Buttonhole Basics

Covers zigzag stitch uses and basic buttonhole creation with Foot 5B.

Sewing Techniques

Corded Buttonholes and Sewing on Buttons

Details corded buttonholes for stretch fabrics and how to sew on buttons.

Sewing Techniques

Darning, Mending, and Heavy Fabric Hems

Instructions for darning, mending, and sewing hems in heavy fabric.

Quilting Techniques

Stitch-in-Ditch, Free-motion, and Handlook Quilting

Details various quilting methods like stitch-in-the-ditch, stippling, and handlook effects.

Hems and Zippers

Blindhems and Zipper Installation

Instructions for sewing blindhems and installing zippers.

Machine Maintenance

Cleaning and Component Replacement

Steps for cleaning the machine, bobbin area, and replacing the stitch plate.

Troubleshooting Guide

General Problems and Stitch Skipping

Addresses common issues like fabric movement, button response, and skipped stitches.

Troubleshooting Guide

Thread Breaks and Feeding Issues

Troubleshooting needle/bobbin thread breaks, uneven stitches, and feeding problems.

Motor Overload and Lint Issues

Solutions for main motor overload and lint accumulation.

Intellectual Property and Disposal

Trademarks and Recycling Information

Information on product trademarks and environmentally-safe disposal.

Related product manuals

Pfaff quilt ambition 2.0

Pfaff perfomance 2054

124 pages

Pfaff perfomance 2058

98 pages

Pfaff performance 2056

110 pages

Pfaff Creative Performance

148 pages

Table of Contents

Questions and Answers:

Pfaff passport 2.0 Specifications

Summary

Important Safety Instructions

Safety Precautions and Warnings

Servicing of Double Insulated Products

Servicing Guidelines

Introduction

Machine Overview

Introduction

Accessories

Presser Feet

Types and Uses of Presser Feet

Stitch Overview

Utility Stitches

Stitch Overview

Quilt, Needle Art, Satin, and Decorative Stitches

Preparations

Unpacking and Power Connection

Packing Away After Sewing

Preparations

Free Arm, Leveling, Thread Cutter, and Spool Pins

Preparations

Spool Pin Positions and Machine Threading

Preparations

Needle Threader and Twin Needle Setup

Preparations

Bobbin Winding Procedure

Preparations

Bobbin Insertion and IDT System

Presser Foot Pressure

Thread Tension Adjustment

Needles

Needle Types and Selection

Changing Needle and Presser Foot

Needle, Feed Dog, and Presser Foot Operations

Control Panel Buttons

Button Operations for Sewing Control

Warning Messages and Sound

System Alerts and Audio Settings

Sewing Operations

Selecting and Adjusting Stitches

Sewing Techniques

Zigzag Stitch and Buttonhole Basics

Sewing Techniques

Corded Buttonholes and Sewing on Buttons

Sewing Techniques

Darning, Mending, and Heavy Fabric Hems

Quilting Techniques

Stitch-in-Ditch, Free-motion, and Handlook Quilting

Hems and Zippers

Blindhems and Zipper Installation

Machine Maintenance

Cleaning and Component Replacement

Troubleshooting Guide

General Problems and Stitch Skipping

Troubleshooting Guide

Thread Breaks and Feeding Issues

Motor Overload and Lint Issues

Intellectual Property and Disposal

Trademarks and Recycling Information

Related product manuals