18
B
C
D
D
D
A
Changing the needle
1. Use the hole in the multi-purpose tool to hold
the needle.
/RRVHQWKHQHHGOHVFUHZ8VHWKHVFUHZGULYHU
if necessary.
5HPRYHWKHQHHGOH
4. Insert the new needle, using the multi-purpose
tool. Push the new needle upwards with the
ÁDWVLGHDZD\IURP\RXXQWLOLWZLOOJRQR
further.
5. Tighten the needle screw as tight as it will go.
Lowering feed dogs
<RXFDQORZHUWKHIHHGGRJVE\PRYLQJWKHVZLWFK
DWWKHEDFNRIWKHIUHHDUPWRWKHOHIW0RYHWKH
switch to the right if you wish to raise the feed
dogs.
1RWH7KHIHHGGRJVZLOOQRWUDLVHLPPHGLDWHO\ZKHQWKH
OHYHULVVZLWFKHG7XUQWKHKDQGZKHHORQHIXOOWXUQRU
start sewing to re-engage the feed dogs.
Presser foot lift
The presser foot is lowered or raised with the
SUHVVHUIRRWOLIW$,I\RXDUHVHZLQJRQKHDY\
IDEULFRUVHYHUDOOD\HUVRIIDEULFWKHSUHVVHUIRRW
can be raised higher to make it easier to place the
fabric underneath the presser foot.
Changing the presser foot
Remove presser foot
Press the presser foot downwards until it
disengages from the presser foot holder.
Attach presser foot
Place the presser foot under the presser foot holder
%OLQLQJXSWKHQRWFK&ZLWKWKHSLQV'
Lower the presser foot lift and the presser foot will
engage in the presser foot holder.
1RWH&KHFNWKDWWKHSUHVVHUIRRWLVSURSHUO\DWWDFKHGE\
UDLVLQJWKHSUHVVHUIRRWOLIW
To Next Page
Loading...
Need help?
General
