12
ED
C
B
A
FG
Vertical position
5DLVHWKHVSRROSLQWRWKHYHUWLFDOSRVLWLRQ6OLGH
on the large spool cap and place a felt pad under
WKHWKUHDGVSRRO7KLVLVWRSUHYHQWWKHWKUHDGIURP
reeling off too fast.
'RQRWSODFHDVSRROFDSRQWRSRIWKHVSRROSLQDV
WKDWZRXOGSUHYHQWWKHVSRROIURPURWDWLQJ
Auxiliary spool pin
The auxiliary spool pin is used when winding a
bobbin thread from a second spool of thread or for
a second spool when sewing with a twin needle.
Insert the auxiliary spool pin into the hole at the
WRSRIWKHPDFKLQH$6OLGHRQDODUJHVSRROFDS
and place a felt pad under the thread spool.
Threading the machine
Make sure that the presser foot is raised and the
needle is in its highest position.
3ODFHWKHWKUHDGRQWKHVSRROSLQDQGÀWWKH
appropriately sized spool cap.
3XOOWKHWKUHDGLQWRWKHULJKWWKUHDGJXLGH%
IURPIURQWWREDFNDQGWKHOHIWWKUHDGJXLGH&
from back to front. Pull the thread between the
WHQVLRQGLVFV'
3. Thread down through the right-hand
threading slot and then upwards through the
left-hand threading slot.
%ULQJWKHWKUHDGIURPWKHULJKWLQWRWKHWDNHXS
OHYHU(DQGGRZQLQWKHOHIWKDQGWKUHDGLQJ
VORWLQWRWKHORZHUWKUHDGJXLGH)DQGWRWKH
QHHGOHWKUHDGJXLGH*
5. Thread the needle.
0DLQVSRROSLQLQYHUWLFDOSRVLWLRQ
$X[LOLDU\VSRROSLQ