Pfaff quilt ambition 2.0 User Manual (English)

Questions and Answers:

D
Dennis EvansAug 17, 2025
Why does the needle thread keep breaking on my Pfaff quilt ambition 2.0 Sewing Machine?
- J
  John BrownAug 17, 2025
  There are several reasons why the needle thread might break. Ensure the needle is correctly inserted and is the appropriate type (system 130/750 H). Replace the needle if it's bent or blunt. Double-check that the machine is threaded correctly and that you're using the right size needle for the thread. Consider using higher quality thread, and make sure you're using the correct spool cap and spool pin position. Finally, inspect the stitch plate hole for damage and replace if necessary.
M
Michael HermanAug 19, 2025
Why is my Pfaff quilt ambition 2.0 Sewing Machine skipping stitches?
- J
  Joy WebbAug 19, 2025
  Several factors can cause a Pfaff Sewing Machine to skip stitches. Ensure the needle is correctly inserted (see page 21) and that you are using needle system 130/750 H. Replace the needle if it is bent or blunt. Also, verify that the machine is threaded properly, the correct presser foot is attached, and the needle size is appropriate for the thread and fabric.
R
Richard ShieldsAug 22, 2025
Why does the seam have uneven stitches on my Pfaff Sewing Machine?
- W
  William ClementsAug 22, 2025
  If the seam on your Pfaff Sewing Machine has uneven stitches, the thread tension might not be correct, so check the needle thread tension and the threading. You might also be using thread that is too thick or slubbed; if so, change the thread. Additionally, make sure the bobbin thread is evenly wound and that you're using the correct needle, inserting it properly (see page 21).
A
Amanda MillerAug 25, 2025
What to do if my Pfaff quilt ambition 2.0 does not feed or feeds irregularly?
- J
  Jamie WilsonAug 25, 2025
  If your Pfaff Sewing Machine is not feeding fabric or is feeding irregularly, check that the machine is threaded properly. Also, sewing lint may have collected between the feed dogs. Remove the stitch plate and clean the feed dogs with a brush.
J
Jennifer SanchezAug 28, 2025
Why is the bobbin thread breaking on my Pfaff Sewing Machine?
- M
  Mr. Richard Caldwell MDAug 28, 2025
  If the bobbin thread breaks on your Pfaff Sewing Machine, first check that the bobbin is inserted properly. Also, inspect the stitch plate hole for damage and replace the stitch plate if needed. Ensure the bobbin area is clean, removing any lint. Finally, make sure the bobbin is wound correctly; wind a new bobbin if necessary.
J
Jonathan GarciaAug 30, 2025
What to do if the function buttons on my Pfaff quilt ambition 2.0 do not respond?
- M
  mckinneystevenAug 30, 2025
  If your Pfaff Sewing Machine function buttons do not respond to touch, it might be sensitive to static electricity. Turn the machine off and then on again. If the problem continues, contact your local authorized PFAFF® dealer.
M
Michael PattersonSep 2, 2025
Why does the needle break on my Pfaff Sewing Machine?
- S
  Steven WilliamsSep 2, 2025
  If the needle breaks on your Pfaff Sewing Machine, ensure you insert the needle correctly (see page 21) and attach the correct needle for the fabric.
J
James SmithSep 5, 2025
What to do if my Pfaff Sewing Machine will not sew?
- N
  Nicholas RuizSep 5, 2025
  If your Pfaff Sewing Machine will not sew, check that all plugs are securely plugged into the machine and the wall socket. Also, ensure the bobbin winder lever is pushed to the sewing position.
S
Stacey Fox MDSep 8, 2025
What to do if icons on the screen of my Pfaff quilt ambition 2.0 are not activated when touched?
- T
  Timothy VanceSep 8, 2025
  If icons on the screen of your Pfaff Sewing Machine are not activated when touched, calibrate the screen. You can find the calibrate option in the settings menu.
P
Patrick EatonSep 10, 2025
Why am I getting wrong stitch, irregular or narrow stitch on my Pfaff quilt ambition 2.0 Sewing Machine?
- C
  chenrebeccaSep 12, 2025
  If you're experiencing wrong, irregular, or narrow stitches on your Pfaff Sewing Machine, try deactivating the twin needle or stitch width safety in the settings menu.