What to do if the bobbin thread breaks on my Pfaff Ambition line Sewing Machine?
If the bobbin thread breaks on your Pfaff Sewing Machine, start by checking that the bobbin is inserted correctly. A damaged stitch plate hole can also cause this, so consider changing the stitch plate. Make sure the bobbin area is clean and free of lint. If the bobbin isn't wound correctly, wind a new one.
How to fix uneven stitches on my Pfaff Sewing Machine?
If your Pfaff Sewing Machine seam has uneven stitches, check the needle thread tension and the threading of your machine. Changing the thread might be helpful if you are using thread that is too thick or slubbed. Also, check the bobbin winding to ensure it's even. Finally, make sure you are using the correct needle and that it is properly inserted.
Why does my Pfaff Sewing Machine skip stitches?
If your Pfaff Sewing Machine skips stitches, ensure that you've inserted the needle correctly, and that you are using the appropriate needle system 130/750 H. A bent or blunt needle can also cause this issue, so replace it with a new one. Also, double-check that the machine is threaded correctly and that you're using the correct presser foot. Finally, verify that the needle size is appropriate for the thread and fabric you're using.
General| Speed Control | Yes |
|---|---|
| Start/Stop Button | Yes |
| Needle Up/Down | Yes |
| Lighting | LED |
| Max Stitch Width | 7mm |
| Free Arm | Yes |
| Type | Electronic |
| Display Screen | LCD |
| Presser Feet | Multiple included |
To Next Page