EasyManua.ls Logo

Pfaff ambition essential 1.0

Pfaff ambition essential 1.0
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
24 July 2014
Service Manual
104 73 15-26
© 2014 SVP Worldwide - All Rights Reserved.
ambition
1.0
1.5
essential

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Pfaff ambition essential 1.0 and is the answer not in the manual?

Pfaff ambition essential 1.0 Specifications

General IconGeneral
BrandPfaff
Modelambition essential 1.0
CategorySewing Machine
LanguageEnglish

Summary

Important Safety Instructions

Directions for Use

Guidance for service personnel and salesmen on machine operation and handling.

ESD Precautions

Essential precautions to prevent damage from electrostatic discharge during servicing.

Settings - Quick Reference

Belt Tension Adjustment

Procedure for adjusting drive belt and motor belt tension.

Needle Position and Timing

Setting the needle to center position and timing related adjustments.

Hook and Needle Gap

Ensuring the correct gap between the needle and the hook tip.

Service Program Functions

Menu 1 - Stepper Motors and Pivot Position

Settings and adjustments for step motors and pivot positions.

Menu 2 - Display and Sensor Tests

Testing and resetting display and sensor functions.

Menu 3 - Test Patterns

Utilizing pre-programmed patterns for machine diagnostics and testing.

Removing the Covers

Base Cover Removal

Step-by-step instructions for removing the machine's base cover.

Rear Cover Removal

Procedure for safely removing the rear cover of the sewing machine.

Front Cover Removal

Detailed steps for detaching and removing the front cover.

Technical Information

Main Circuit Board Diagrams

Circuit diagrams and component identification for the main circuit board.

LCD Circuit Board Diagram

Diagram and connection details for the LCD control circuit board.

Power Supply Procedures

Instructions for the safe removal and mounting of the power supply unit.

Fault Finding (Ambition 1.0 - 1.5)

Machine Operation Issues

Troubleshooting common problems related to machine operation and basic functions.

Motor and Sensor Issues

Diagnosing and resolving problems with motors, sensors, and related components.

Controller and Lamp Issues

Troubleshooting issues with the foot controller, LED lamps, and associated connections.

Fault Finding (Ambition Essential)

Machine Operation and Display Issues

Troubleshooting common problems with machine operation and LCD display.

Motor and Position Issues

Diagnosing issues related to motors, needle position, and reverse functions.

Zig-zag and Feed Motor Issues

Troubleshooting problems with zig-zag and feed step motors.

BH, Foot Controller, and LED Lamp Issues

Troubleshooting BH, foot controller, and LED lamp problems.

Related product manuals