4:6
Sequencing
Load sequence
Select load (7) to open the load sequence menu.
Select the sequence you want to load. Selected
memory number is surrounded by a frame.
Confi rm your selection by pressing OK (C).
The sequence will appear in sewing mode ready to
be sewn out.
For 1.5: To exit the load sequence menu without
loading, touch cancel (D).
For 1.0: To exit the load sequence menu without
loading, press the load button (7).
Sewing a sequence
To sew the sequence, return to sewing mode by
pressing the sequencing button (4) or step on the
foot control. Your sequence is ready to be sewn
out. The sequence will be sewn continuously.
To sew only one repetition of your sequence, add a
tie-off at the end, see page 3:5.
Note: Adjustments made in sewing mode will affect the
whole sequence. However, these adjustments will not be
saved if you return to sequencing.
ambition™ 1.5
ambition™ 1.0
4
4
ambition™ 1.0
7
ambition™ 1.5
7
CD
C
To Next Page
Loading...
Need help?
General
