24
Preparations
Settings
In the settings menu, you can adjust the machine settings
and screen settings. All settings are stored even when the
machine is turned off.
Settings menu
Touch the settings button (A) to open. The settings menu is
divided into two tabs. Select a tab (1 or 2) by touching it.
Twin needle
Touch the twin needle icon to activate. Touch “-” and “+”
to set the twin needle width. The selected width is shown in
the twin needle icon.
When a twin needle size is selected, the width of all stitches
is limited for that needle size to prevent needle breakage.
A warning pop-up will be shown if you select a stitch that
is too wide for the set twin needle size.
Note: Some stitches, due to design and functionality, cannot
be sewn with a twin needle. Overlock stitches, buttonholes and
darning stitches are examples of stitches that are not suitable for
twin needle sewing. A warning sound will be heard when trying
to activate twin needle when such a stitch is selected.
When activated, the twin needle icon will be shown in
sewing mode.
The setting is kept until you deactivate it.
Note: Twin needle and stitch width safety cannot be used at
the same time. A warning sound will be heard when trying to
activate both settings.
Stitch width safety
Select this function when using a straight stitch needle plate
or a straight stitch presser foot to lock the center needle
position for all stitches to prevent damage to the needle,
presser foot or stitch plate.
Touch the stitch width safety icon to activate. When
activated, the stitch width safety icon will be shown in
sewing mode.
The setting is kept until you deactivate it.
Note: When turning on the machine with this setting activated, a
pop-up informs you that the machine is set for straight stitch. All
stitches are limited to 0 mm stitch width.
Twin needle and stitch width safety cannot be used at the same
time. A warning sound will be heard when trying to activate both
settings.
Contrast
Touch “-” and “+” to adjust the contrast of the touch screen.
The setting is stored even when the machine is turned off.
A
To Next Page
Loading...
