27
Sewing
68
7
13
Sewing mode - overview
1.   Selected stitch number and name
 6WLWFKÀHOG
3.  Drop down stitch selection
4.   Stitch width/stitch positioning
5. Stitch length/density
Select a stitch
Touch the stitch number on the screen (1) to open the 
selection keypad. Touch 1-9 to select the corresponding 
stitch. Press two or three digits in quick succession to 
select a stitch from 10 and up. Touch the OK icon (6) to 
FRQÀUP\RXUVWLWFKVHOHFWLRQ7RXFKWKHGHOHWHLFRQ
to erase entered number. Touch cancel (8) to close the 
keypad without selecting a stitch.
You can also select a stitch by touching the drop down 
stitch selection (3), and select from the drop down list. 
Touch the arrows to scroll up and down in the list and 
touch a stitch name to select it.
Sewing
6HZLQJPRGHLVWKHÀUVWYLHZRQWKHVFUHHQDIWHU\RXWXUQRQWKHPDFKLQH<RXUVHOHFWHGVWLWFKZLOOEH
VKRZQLQUHDOVL]HLQWKHVWLWFKÀHOG+HUH\RXZLOOÀQGDOOWKHEDVLFLQIRUPDWLRQ\RXQHHGWRVWDUWVHZLQJ
Straight stitch is selected by default. 
Sewing recommendations
Press the info button to show sewing 
recommendations for the current stitch. Press the 
button again to hide the information.
9.   Stabilizer recommendation
10.  Presser foot recommendation
11. Feed dog/IDT
™
 system recommendation
12. Needle recommendation/setting
  Set for twin needle
  Wing needle recommended
  Set for stitch width safety
13.  Recommended tension
Note: All symbols and options will not be shown at the 
same time.
Note: If the presser foot recommendation shows a 
presser foot with a “+”, an optional presser foot 
is required for the selected stitch. See page 11 
for information about which foot to use for the 
selected stitch.
1
2
10
4
3
5
9
11
12