Need help?Do you have a question about the Pfaff 145 and is the answer not in the manual?
General| Type | Industrial Sewing Machine |
|---|---|
| Buttonhole | No |
| Built-in Needle Threader | No |
| Max Sewing Speed | 2, 800 stitches per minute |
| Application | Medium to Heavy Fabrics |
| Power | Varies depending on motor |
General guidance on operating the sewing machines covered in the manual.
Step-by-step instructions for winding thread onto the bobbin.
Procedures for replacing and correctly threading the bobbin case.
Identifies different needle systems and point styles for various fabrics.
A guide to selecting appropriate needle and thread sizes for optimal sewing.
Instructions on how to correctly insert and secure a new needle.
Detailed steps for passing thread through the needle eye.
How to bring the bobbin thread up through the needle plate.
Adjusting both upper and lower thread tensions for balanced stitches.
Steps to adjust the trimming knife for optimal cutting performance.
How to engage and disengage the thread trimmer mechanism.
Details how to adjust stitch length on specific wheel-feed machines.
Instructions for swapping out the alternating presser feet on the machines.
Guidelines for proper oiling of all moving machine parts.
Adjusting the foot lift height for different material thicknesses.
Step-by-step guide for threading both left and right needles.
Specific instructions for threading the needle on the Pfaff 543-712 models.
Adjusting the foot lift height for different material thicknesses.
Guide on how to thread the needle for Pfaff 4141 and 4145 machines.
Explains the functions controlled by the machine's pedal.
Details the finger guard protecting against needle injury.
Describes the safety guard for the take-up lever.
Explains the guard covering the belt's entry to the balance wheel.
Describes the guard covering the belt beneath the tabletop.
To Next Page
