EasyManua.ls Logo

Pfaff 1426

Pfaff 1426
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instruction Manual
1425
1426
296-12-18 403/002
Betriebsanleitung engl. 01.01
This instruction manual applies to machines from the
following serial numbers onwards:
PFAFF 1425 # 2572934
PFAFF 1426 # 2572935

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Pfaff 1426 and is the answer not in the manual?

Pfaff 1426 Specifications

General IconGeneral
OperationManual
Bobbin systemTop-loading
Adjustable stitch lengthYes
Adjustable stitch widthYes
Max Stitch Length4 mm
Max Stitch Width5 mm
SpeedUp to 800 stitches per minute
TypeMechanical Sewing Machine
Stitch functionsStraight, Zigzag, Decorative
Buttonhole Styles4-step buttonhole
BobbinStandard bobbin

Summary

Safety

General notes on safety

Guidelines for safe operation, maintenance, and handling of the machine.

Notes for operating and technical staff

Specific safety obligations for operating and technical personnel.

Danger warnings

Specific warnings about potential hazards and necessary precautions.

Proper Use

Specifications

Controls

Installation and commissioning

Installation

Steps for installing the machine, including site requirements and table height adjustment.

Commissioning

Procedures for checking and preparing the machine for operation.

Setting up

Winding the bobbin thread, regulating the winder tension

Steps for winding bobbin thread and adjusting winder tension.

Bobbin-changingthreading, and regulating the bobbin thread tension

Instructions for changing and threading bobbins and setting bobbin tension.

Threading needle thread and regulating its tension on the PFAFF 1425

Guide for threading needle thread and adjusting tension on PFAFF 1425.

Threading needle threads and regulating tensions on the PFAFF 1426

Guide for threading needle threads and adjusting tensions on PFAFF 1426.

Care and maintenance

Oiling the hook

Instructions for oiling the hook mechanism and checking oil levels.

Adjustment

Adjusting the basic machine

Procedures for adjusting fundamental machine mechanisms.

Adjusting the edge trimmer -73102

Detailed steps for adjusting the edge trimmer unit.

Adjusting the thread trimmer 90081

Instructions for adjusting the thread trimmer model 900/81.

Related product manuals