Pfaff 3834-3/11 - Sewing Machine Main Functions

24 PFAFF
Main functions
1 - Programming
2 - Memory card
3 - Switch functions
4 - Counter
5 - Speeds
6 - Service
1. Programming
Under the main function Programming the programs for programmed seams are inputted (for
programming options see page 25).
2. Memory card (optional)
Functions:
- To save programs
- To transfer programs from one machine to another
For sub-functions see menu functions - overview page 19.
3. Switch functions
Function knee switch ON/OFF is selected with sub-function KNEE SWITCH. If ON is selected, all
freely programmable programs (program number 3 to 24) will be converted for knee switch. If OFF is
selected, all freely programmable programs (program number 3 to 24) are converted for grading.
Via sub-function LANGUAGES the language for the dialog in the display is determined.
4. Counter
With sub-function SLOW START STITCHES the number of stitches is inputted that will be performed at a
reduced speed in sewing mode.
With sub-function PEDAL PARAMETERS the degree of pedal delay (0 = little delay, 9 = large delay) is
inputted.
5. Speeds
With the sub-functions it is possible to input the maximum speed and the speed for the slow start
stitches.
6. Service
With this main function the user can check some of the hardware functions and the control. In addition,
he can carry out some settings on the sewing drive.