Pfaff 3834-3/11 - Page 31

PFAFF 31
Input desired grading value, say, 0
GRADING VAL. 0 MM 2.7 2.5
SEGMENT L2 _._ 2.5
This sequence may be continued freely up to seam
segment L 15.
With the following display in the last desired seam
segment
SEAMLENGTH _ _ MM _._ _._
Press or until
END OF PROGRAM _._ _._
TEACH _._ _._
After seam start is reached continue sewing for a
few stitches, then actuate pedal to 2nd position
backwards - sewing threads will be trimmed.
Bring pedal to resting position (position 0) - the
control switches to program start. Display:
PROGRAMMING _._ _._
The old status line appears, say:
9 R1 0 50 _._ _._
Recall program number 3.
PROGRAM NO. 9 _._ _._
PROGRAM NO. 3 _._ _._
3 R1 0 50 2.6 2.5
Machine is operational, seam start on right hand
sleeve.
If another ready-made garment size is to be
selected, make sure that only a size is selected
which is derived from the programmed basic size
(see tables on page 29).
Change ready-made garment sizes, say, to 48:
SIZE 50 _._ _._
and
SIZE 48 _._ _._
3 R1 0 48 2.6 2.5