30 PFAFF
This sequence can be continued freely up to seam
segment R 15.
With display in last desired seam segment
SEAMLENGTH _ _ MM _._ _._
Press or until
END OF SEAM _._ _._
TEACH _._ _._
After seam start is reached continue sewing for a
few stitches, then actuate pedal to second positi-on
backwards - sewing threads will be trimmed.
Bring pedal to resting position (position 0) - the
control switches to the first seam segment of the
left hand sleeve. Display:
SEGMENT L1 _._ 2.5
FEED ROLL. PR. _._ 2.5
and
FEED ROLL. PR. 2.7 2.5
SEAMLENGTH _ _ _MM 2.7 2.5
Press or until
TEACH SEAM LE. 2.7 2.5
TEACH 2.7 2.5
Position workpiece underneath roller presser and
sew first seam segement.
GRADING VAL. _ _ MM 2.7 2.5
FEED ROLL. PR _._ 2.5
and
FEED ROLL. PR 2.8 2.5
SEAMLENGTH _ _ _MM 2.8 2.5
Press or until
TEACH SEAM LE. 2.8 2.5
TEACH 2.8 2.5
Sew desired length of second seam segment.
GRADING VAL. _ _ MM 2.8 2.5
Input desired grading for second seam segment,
say, 2 mm.
GRADING VAL. 2MM 2.8 2.5
SEGMENT R3 _._ 2.5
FEED ROLL. PR _._ 2.5
and
FEED ROLL. PR. 3.0 2.5
To Next Page
Loading...
