Pfaff 3834-3/11 - Page 29

PFAFF 29
Programming example: Incrementing via measu-
rement of length (learn seam length) with grading
INPUT _._ _._
3 SWITCH FUNCT. _._ _._
KN. SW. OFF-0 ON-1 _._ _._
INPUT _._ _._
PROGRAM NO. _ _._ _._
PROGRAM NO. 3 _._ _._
SIZE _ _ _._ _._
Input basic size according to table on page 29 (e.g.
50 for German mens sizes).
and
SIZE 50 _._ _._
STITCH LENGTH _._ _._
and
STITCH LENGTH _._ 2.5
SEGMENT R1 _._ 2.5
FEED ROLL. PR. _._ 2.5
and
FEED ROLL. PR. 2.6 2.5
SEAMLENGTH _ _ _MM 2.6 2.5
Press or until
TEACH SEAM LE. 2.6 2.5
TEACH 2.6 2.5
Position workpiece underneath the roller presser
and sew first seam segment.
GRADING VAL. _ _ MM 2.6 2.5
Grading values from 0 to 50 mm are possible.
If in the current seam segment no grading is
desired, input 0.
GRADING VAL. 0 MM 2.6 2.5
SEGMENT R2 _._ 2.5