Pfaff 3834-3/11 - Editing Learned Seam Segment Length

PFAFF 37
and and
SEAMLENGTH 115MM _._ _._
The changed seam lengths are saved and the
machine is operational.
Editing the length of a learned seam
segment
If within a programmed sewing program the
learned seam length of a certain seam segment is
to be increased or decreased, the following seam
segment must be decreased or increased by the
same amount.
Example:
Seam segment R2 with a length of 53 mm is to be
decreased by 3 mm.
Seam segment R3 has a length of 112 mm.
INPUT _._ _._
PROGRAM NO. _ _ _._ _._
Select desired program number with numeric keys
and press enter key.
If desired program number is already displayed,
just press enter key.
until
SEGMENT R1 _._ _._
SEGMENT R2 _._ _._
until
SEAMLENGTH 53 MM _._ _._
and
SEAMLENGTH 50 MM _._ _._
until seam segment R3 is reached and
display shows:
SEAMLENGTH 112MM _._ _._