PFAFF 5
Starting up
● Before the machine is put into operation for the first time, clean it thoroughly and oil it (see page 8).
● Check whether the belt guard is mounted (see page 7).
● Before the machine is switched on, connect compressed air and check air filter/lubricator (see
page 8).
● Ask a technician to check if the motor may be operated with the available mains voltage and if it is
properly connected in the junction box.
Never operate the machine if this is not the case.
● The encoder adjustment must only be carried out by persons with appropriate training
(see page 6).
● The maximum sewing speed is 3200 s.p.m.
To Next Page
Loading...
