Pfaff 5483 - Instruction Manual

78 pages

Save Page as PDF

To Next Page

296-12-18 236

Betriebsanleitung engl. 09.99

Instruction Manual

5483

Main Page

Instruction Manual1
Table of Contents3
Contents4
Safety6
Regulations6
General Notes on Safety6
Safety Symbols7
Important Notes for the User7
Notes for Operating and Technical Staff8
Operating Staff8
Technical Staff8
Danger Warnings9
Proper Use10
Specifications11
PFAFF 5483-814/01; 5483 H-814/01 ( Single-Needle Machine )11
Models and Work Aids11
PFAFF 5483-814/01; 5483-814/02; 5483-814/06 ( Two-Needle Machine )12
Models and Work Aids12
Disposal of Machine13
Transportation, Packing and Storage14
Transportation to Customer's Premises14
Transportation Inside Customer's Premises14
Disposal of Packing Materials14
Storage14
Explanation of Symbols15
Controls16
Main Switch16
Pedal16
Presser Bar Lifter17
Switch Buttons on Needle Head17
Reverse-Feed Control Lever18
Feed Regulator Lever18
Thread Tension Release Lever19
Knee Lever (on Machines Without Backtacking Mechanism -91119
Lifting Lever for Puller Roller (on Machines with Puller Feed -748/26)20
Installation and Commissioning21
Installation21
Adjusting the Table Height21
Tensioning the V-Belt22
Fitting the Upper Belt Guard22
Fitting the Lower Belt Guard23
Fitting the Synchronizer23
Assembling and Fitting the Reel Stand24
Commissioning24
Setting up25
Inserting the Needle on Single-Needle Machines25
Inserting the Needles on Two-Needle Machines26
Thread the Needle Thread and Regulating Its Tension on Single-Needle Machines with -91128
Threading the Needle Threads and Regulating Their Tension on Two-Needle Machines29
Threading the Looper Thread and Regulating Its Tension on Single-Needle Machines30
Threading the Looper Threads and Regulating Their Tension on Two-Needle Machines31
Care and Maintenance32
Cleaning32
Machine Oil Level32
Checking/Adjusting the Air Pressure33
Cleaning the Air Filter of the Air-Filter/Lubricator33
Adjustment34
Notes on Adjusting34
Tools, Gauges and Other Accessories34
Abbreviations34
Control and Adjustment Aids35
Adjusting the Basic Machine36
Adjust the Synchonizer (Only for Machines with -900/71)36
Position of the Needle in the Needle Hole37
Preliminary Adjustment of the Needle Height38
Zeroing the Bottom Feed (on Machines with Closed Gearcase)39
Zeroing the Bottom Feed (on Machines with Open Gearcase)40
Feed Driving Motion41
Feed Lifting Motion42
Feed Lifting Height43
Limiting the Stitch Length44
Looper Avoiding Motion45
Looper Motion46
Looper Height and Looper Angle47
Looper-To-Needle Clearance in Sewing Direction49
Looper-To-Needle Clearance Crosswise to Sewing Direction50
Final Adjustment of the Needle Height51
Height of Rear Needle Guard52
Clearance between Rear Needle Guard and Needle53
Position of the Front Needle Guard (Does Not Apply to All Machines)54
Guard of Looper-Avoiding-Motion Eccentric55
Take- up Lever56
Basic Setting of the Needle Thread Regulator and the Thread Guide57
Adjustment of the Backtacking Mechanism (Only for Machines with -91158
Spreader Drive (Only for Machines with -91159
Spreader Height (Only for Machines with -91160
Spreader Motion and Spreader to Needle Clearance (Only for Machines with -91161
Functional Sewing Test (Only for Machines with -91162
Looper Thread Regulator and Looper Thread Take-Up63
Looper Thread Puller64
Clearance between Presser Foot and Needle Plate65
Presser Foot Pressure66
Knee Lever Rest Position67
Knee Lever Play68
Knee Lever Stop69
- Adjusting the Thread-Trimming Device -900/7170
Pre-Adjust the Thread Catcher70
Positioning the Ball Stud71
Position of Thread Catcher to Needle72
Thread Catcher Interlock73
Tension Release74
Cutting Test75
- Parameter Settings76

Pfaff 5483 - Instruction Manual

Table of Contents

Other manuals for Pfaff 5483

Related product manuals