3:3
1
2
5
3
4
Press the alternatives button to view
stitch positioning and density
Sewing
Stitch adjustments
<RXUPDFKLQHZLOOVHWWKHEHVWVHWWLQJVIRU
HDFKVHOHFWHGVWLWFK<RXFDQPDNH\RXURZQ
DGMXVWPHQWVRQWKHVHOHFWHGVWLWFK
The setting changes only affect the selected stitch.
<RXUFKDQJHGVHWWLQJVZLOOEHUHVHWWRGHIDXOWZKHQ
selecting another stitch. The changed settings are not
DXWRPDWLFDOO\VDYHGZKHQWXUQLQJ\RXUPDFKLQHRII
The set stitch width and the stitch length are shown
QH[WWRWKHLFRQVIRUHDFKDGMXVWPHQW:KHQWU\LQJ
to exceed minimum or maximum settings for
width and length, a warning sound will be heard.
Note: The numbers are highlighted when the setting is
changed.
Stitch width (1)
Increase or decrease the stitch width using + and -.
Stitch length (2)
Increase or decrease the stitch length using + and
,IOHQJWKHQLQJD]LJ]DJVWLWFKRUDGHFRUDWLYH
stitch, the entire stitch will be longer. If lengthening
DVDWLQVWLWFKZKHUHWKHGHQVLW\FDQEHDGMXVWHG
the entire stitch will be longer but the density will
remain the same.
Stitch positioning (3)
3UHVVWKHDOWHUQDWLYHVEXWWRQWRVKRZWKHVWLWFK
positioning instead of the stitch width. Use the +
DQGEXWWRQVWRPRYHWKHVWLWFKWRWKHOHIWRUULJKW
Note: This is only possible when using a stitch that is
narrower than 9 mm. You can decrease the stitch width
to make the stitch narrower if necessary.
Stitch density (4)
3UHVVWKHDOWHUQDWLYHVEXWWRQWRVKRZWKHGHQVLW\
setting instead of the stitch length for satin stitches.
1RZWKHVWLWFKOHQJWKDQGEXWWRQVDGMXVWWKH
density. The stitch density does not affect the
actual length of the entire stitch.
Note: This is often used with specialty threads and when
a less dense satin stitch is desired. If you have selected a
buttonhole, the graphic display will by default show the
density setting instead of the stitch length setting.
Thread tension (5)
For the best stitch appearance and durability, make
VXUHWKHQHHGOHWKUHDGWHQVLRQLVFRUUHFWO\DGMXVWHG
LHIRUJHQHUDOVHZLQJWKHWKUHDGVHYHQO\PHHW
between the two fabric layers.
,IWKHEREELQWKUHDGLVYLVLEOHRQWKHWRSVLGHRI
the fabric, the needle thread tension is too tight.
Reduce the needle thread tension.
,IWRSWKUHDGLVYLVLEOHRQWKHXQGHUVLGHRIWKH
fabric, the needle thread tension is too loose.
Increase the needle thread tension.
)RUGHFRUDWLYHVWLWFKHVDQGEXWWRQKROHVWKHWRS
WKUHDGVKRXOGEHYLVLEOHRQWKHXQGHUVLGHRIWKH
fabric.
For 4.2: <RXUVHZLQJPDFKLQHHOHFWURQLFDOO\VHWV
WKHEHVWWKUHDGWHQVLRQIRUWKHVHOHFWHGVWLWFK6HH
page 2:15 for instructions on how to change the
setting manually.
For 3.2: Press the info button. Use the
UHFRPPHQGHGWKUHDGWHQVLRQVHWWLQJJLYHQRQWKH
JUDSKLFGLVSOD\7XUQWKHQXPEHUHGWHQVLRQ
dial to set the tension.