Pfaff HOBBYMATIC 800 User Manual

Trouble
shooting
Cause:
1.
Machine skips
stitches
Needle
not
inserted
correctly.
Wrong
needle
used.
Needle
bent
or
blunt.
Machine threaded
improperly.
Needle too
thin
for
thread
used.
2.
Needle thread
breaks
For any
of the
above reasons.
Thread
tension too
strong.
Poor-quality
or
knotty
thread
used,
or thread
that
has
become too dry
by
excessive
storage.
3.
Needle breaks
Needle
not pushed
up
as far
as
it will
go.
Needle
bent.
Needle
too thin
or
too
thick.
Needle
bent and
strikes needle
plate
because
work is pushed
or
pulled.
Remedy:
Push needle
up
as far as it will
go, its flat
shank side facing
toward
the back.
Insert system
130/705
H needle.
Insert new needle.
Check
threading.
Select
needle
according
to
Needle
and
Thread
Chart.
See
par.
1
above.
Regulate
thread
tensions.
Use
only
good-quality
thread.
Insert
new needle
and
push
it
up as
far
as
it
will
go.
Insert new
needle.
Check
Needle and
Thread
Chart.
Let
machine
feed the work
alone.
Only
gujde th
material lightly.
When
inserting
the
bobbin
case, press
against it
until it
snaps into place.
Bobbin
case improperly
inserted.

Pfaff HOBBYMATIC 800 Specifications

General

Brand	Pfaff
Model	HOBBYMATIC 800
Category	Sewing Machine
Language	English