Need help?Do you have a question about the Pfeiffer Vacuum TC 400 and is the answer not in the manual?
General| Brand | Pfeiffer Vacuum |
|---|---|
| Model | TC 400 |
| Category | DC Drives |
| Language | English |
Defines the scope and applicability of the operating instructions for the product.
Lists related documents and standards referenced within the manual.
Identifies the intended audience and their roles for using the product.
Explains the document's formatting, symbols, and abbreviations used.
Details the meaning and location of labels and stickers on the device.
Provides a list of abbreviations used throughout the manual with their meanings.
Outlines general safety principles, risk levels, and hazard symbols used in the document.
Provides specific safety guidelines related to installation and electrical hazards.
Details essential precautions for safe handling, operation, and maintenance.
Specifies the environmental and operational conditions for safe product use.
Defines the intended and exclusive application of the electronic drive unit.
Lists actions that constitute misuse and void warranty claims.
Describes the product's adherence to functional safety standards like IEC 61508.
Guides users on how to clearly identify the product for communication.
Lists the key technical specifications and variants of the TC 400 drive unit.
Explains the role and purpose of the electronic drive unit in controlling the turbopump.
Lists the items included in the product package.
Details the various connectors and their functions on the drive unit.
Illustrates the wiring and electrical connections for the drive unit.
Explains the 26-pin D-sub connection for remote control and configuration.
Details the power supply requirements and connections for the drive unit.
Describes the function and configuration of the digital inputs.
Explains the function and configuration of the digital outputs.
Details the operation and wiring of the unit's relay contacts.
Describes the RS-485 interface for communication and control.
Details the specifications and pin assignments for the RS-485 serial interface.
Explains how to network devices using the RS-485 connection.
Describes the communication protocol used over the RS-485 interface.
Explains the structure and components of the communication telegrams.
Provides a practical example of a data query telegram and its response.
Shows an example of a control command telegram and its confirmation.
Defines the various data types used in the communication protocol.
Introduces parameters and their non-volatile storage within the drive unit.
Lists and explains parameters used for controlling the turbopump's functions.
Details parameters for querying the current status and operational data.
Explains parameters used for configuring set values like run-up time and speed points.
Covers extended parameters available for control via the DCU.
Explains how to configure drive unit connections using the parameter set.
Details how to set up and configure analog inputs.
Explains the configuration options for analog outputs.
Describes how to configure connections for accessory devices.
Guides on selecting and activating communication interfaces.
Explains different operating modes like gas type-dependent operation.
Details how to set and adjust the power consumption parameter.
Addresses causes and settings for the turbopump's run-up time.
Explains how to configure and use rotation speed switch points for process control.
Describes how to adjust the turbopump's speed for optimal performance.
Provides guidance on using standby mode for reduced operation.
Details the process for verifying nominal rotation speed settings.
Explains different modes for operating the connected backing pump.
Describes how to configure backing pump standby mode.
Covers the installation and configuration of accessory devices.
Explains the different venting modes available for the turbopump.
Provides the procedure for starting the turbopump.
Details the steps for safely shutting down the turbopump.
Explains how to monitor the pump's operating status via LEDs.
Provides guidelines on recycling and disposing of product materials.
Specifies how to safely dispose of the electronic drive unit components.
Discusses general warnings about hazards during malfunction handling.
Lists error codes, their problems, causes, and remedies for troubleshooting.
Details specific messages displayed when using a DCU.
Guides users on how to utilize Pfeiffer Vacuum's service offerings.
To Next Page
