Need help?Do you have a question about the Pfeiffer Vacuum TPG 500 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Power Supply | 24 V DC |
| Communication Interface | RS-485 |
| Operating Temperature | 0 °C to +50 °C |
| Accuracy | Depending on connected gauges |
| Resolution | Depending on connected gauges |
| Output signal | 0-10 V, 4-20 mA |
| Weight | 0.8 kg |
Details the document's applicability and scope for the product.
Lists related documents required for proper product operation and installation.
Specifies product variants and their identification on the rating plate.
Informs about the firmware version on which the document is based.
Identifies the intended audience for these operating instructions.
Explains text and symbol conventions used throughout the manual.
Describes the meaning of pictographs used for information.
Details the stickers found on the product and their significance.
Provides a list of abbreviations used in the document.
Lists trademarks and their respective owners.
Outlines risk levels and general safety principles for product use.
Provides essential safety instructions based on product life stages and risk assessment.
Details general safety measures and duties for product handling and operation.
Defines the intended use of the product and its capabilities.
Specifies the required qualifications for personnel working with the product.
Outlines operator responsibilities and essential requirements for safe use.
Illustrates the physical layout and components of the device.
Explains the various indicators and information displayed on the device.
Details the function of buttons and controls on the device.
Describes the available connection ports and their functions.
Lists all items included in the product shipment.
Provides guidelines for safe transportation to prevent damage.
Offers recommendations for proper storage to maintain product integrity.
Instructions for mounting the device in a standard 19-inch rack.
Guidance for integrating the device into a control panel or switchboard.
Steps for setting up and using the device as a standalone unit.
Details on how to properly connect the device to ground for safety.
Procedure for connecting the device to the electrical power source.
Information on installing or replacing plug-in boards for extended functionality.
Steps for powering on the device and initial checks.
Instructions for setting up the Ethernet connection and network parameters.
Covers fundamental operations and button functions.
Explains how to perform measurements and factors affecting accuracy.
Details how to convert measuring signals to pressure values.
Describes the different operational modes of the device.
Details the functions and displays within the measuring mode.
Explains how to navigate and modify device parameters.
Covers parameters related to gauge settings and filtering.
Details how to control the switching behavior of gauges.
Explains system-wide parameters like units, display, and language.
Covers settings for USB, RS-485, and Ethernet communication.
Information on configuring and using the data logging function.
Describes functions for saving, restoring, and formatting parameters.
Details device tests for firmware, hardware, display, and relays.
Procedure for safely powering down the device.
Instructions for safely cleaning the device surfaces.
Guidance on when and how to replace the device's internal battery.
Steps for updating the device's firmware via USB.
Lists common errors, their possible causes, and remedies.
Guidelines for safe shipping, including handling of contaminated products.
Provides information on recycling materials and environmental protection.
Specific steps for safely disposing of the product and its components.
Overview of available services, support, and contact information.
Describes available accessories like measuring and interface boards.
Lists accessory part numbers for ordering.
Provides conversion tables for pressure units and gas throughput.
Details specifications like voltage, power, weight, and environmental conditions.
Illustrates the physical dimensions of the device.
To Next Page
