Chapter 3: Network Setup & Quick Start Guides | 7
NETWORK SETUP &
QUICK START GUIDES
Phantom cameras are typically controlled with PCC software through a dedicated Ethernet
network. PCC is compatible with the 32- and 64-bit versions of Windows 7 Pro, Windows 8.1
and Windows 10 operating systems.
The latest version can be downloaded at: www.phantomhighspeed.com/PCC
1Gb & 10Gb ETHERNET
All Phantom UHS cameras come with standard Gigabit (Gb) Ethernet and 10-Gigabit (10Gb)
Ethernet for use as a secondary means of connection. With 10Gb Ethernet, the Phantom UHS
cameras can achieve significantly higher download speeds, which makes them a great option
for saving large files quickly out of RAM.
The Gb Ethernet and 10Gb Ethernet have separate
ports and different IP configurations, as described
later in this section.
The ‘IP’ and ‘XIP’ addresses assigned to the camera (that begin with 100.100 and 172.16
respectively) can be found on the Serial Number and IP Address label.
To Next Page
Loading...
