Need help?Do you have a question about the Phantom v2640 and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Maximum Frame Rate at Max Resolution | 6, 600 fps |
| Shutter | Global Electronic Shutter |
| Lens Mount | Nikon F-mount |
| Minimum Exposure | 1 μs |
| Shutter Speed | 1 µs to 1 sec |
| Video Output | HDMI |
Ports for power, Ethernet, remote control, GPS, and data transfer.
Information on using Gigabit and 10-Gigabit Ethernet connections for data transfer.
Steps to configure a Gb Ethernet connection for the camera.
Steps to install drivers and assign IP for 10Gb Ethernet connection.
Steps for capturing a cine after network and software setup.
Description of B-REF, TOOLS, PLAYBACK, MENU, and TRIGGER buttons.
How to navigate and access the camera's six menu pages.
Explanation of PCC's Live, Play, Manager tabs and Phantom Video Player.
Adjusting camera settings and image parameters via PCC software.
Mapping ports to signals and controlling them via PCC.
Configuration of signal characteristics like width, delay, and filter.
Detailed steps for defining point parameters and enabling autotracking.
Global headquarters, ticket submission, and live support details.
To Next Page
